3 hours ago Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    Click here to ask your question

Proper gas/oil mixture for Homelite XL-12? ?

I recently inherited a nice old homelite XL-12. It was out of fuel so I put in fresh fuel mixture, 40:1, and a new plug and it fired right up. On the gas cap it says,
1/2 pint oil to 1 gallon of gas. That's like 16:1 fuel mix.
With todays new 2 stroke oils, do I still need to mix the fuel that way? It seems like an awful lot of oil. I have a stihl as well that uses a 50:1 mix. Any info would be appreciated.
C. Cooke, February 2009
32/1 is the correct mixture from what i have learned and read. I mix 5 oz to a gallon and have no probs. work with your saw and see where it starts to smoke at, that will not hurt it and then just lean it out a bit.

Tim, May 2009
Mix it to the dilution ratio on the bottle of 2-stroke oil you are going to use. If you're using Stihls semi-synthetic Red then mix at 50:1 and tha is the correct ratio for all.

pleasant, February 2009
link Click here to see other fixes for Homelite.