Instructions are lost. Have KLIK alarm clock that works accurately - time, date, and temperature, but we cannot work out how to set the alarm. On the top is one long button, with Light on the left and Snooze on the right. It has four buttons, two on left side of LED display: Mode, Set, and two on right side: Receive, Adjust. When pressing Mode the time changes to 12:00 AL and when pressed again it reverts to actual time. All combinations of Mode, Set, etc. have been tried and nothing changes. Any help would be appreciated.

Brenda H, February 2009

If the buttons don't work, it's probably because they haven't been used for a while, and deposits build up on the contacts. Press the buttons a good few times, and gradually they start working.

Ian, September 2023

Press the Mode button to enter the Alarm setting mode.
Press Adjust to toggle the alarm on or off. When alarm is set to on, the bell symbol is displayed, when alarm is off, no symbol is displayed. The bell is quite a small icon on my Klik travel clock, and not readily obvious to my eyesight. Click Mode to return to time display.

Paul Burbidge, September 2018

Thanks Peter. That works just fine - but how do I turn the alarm off?

Jim, January 2010

Press and hold Mode button until the alarm time shows.
Press and hold the button underneath (Set) until the first figure starts to flash.Press the bottom right button (Adjudt) the set the hour.
Press the Set button again to get the minutes flashing and then press Adjust button to set desired minutes.
Press Mode button to show desired display when finished.

PETER, October 2009