home Fix label Bathroom Appliances label_important Baths and Showers

shower sliding door runner wheels?

Any body know were i can get spare shower door runner wheels.My shower cubicle is a sovereign 900 quadrant.

Terry M, February 2009

home Fix label Bathroom Appliances label_important Baths and Showersdone

Hi Amanda,

Try Di Vapor here, they will probably have the plastic shower door roller you're looking for - www.divapor.com/spares/showers/door-rollers/door-rollers.php

Barry Dawn, December 2014

Hi I need plactic type runners for a quadrum 900x900 shower cubicle do u know where I can get some

Amanda Davies, October 2014

this company were very helpfull
http://www.showerdoorrollers.co.uk/page3.htm

alison, December 2012

try a company called www.showerdoorrollers.co.uk

jim, December 2012

Try Ebay. Plenty available.

Alan, May 2012

i have a zone quadrant shower from B & Q and need replacement door rollers

They do not have these anymore
their manuafacturer said they are B2 or E2

Please help!!!

MWhite, January 2012

I have just ordered replacement twin wheel runners from Primrose bathrooms after reading all of your posts. Thanks guys, you were a great help.
In future I'll lubricate them to stop them from getting wedged (it was my brute force that broke them in conjunction with our hard water)......
we've only had one working door for 2 months!!

Will repost when they arrive......

lorraine, January 2011

try looking on this site
http://www.showerdoorrollers.co.uk/

jim, November 2010

The follow manufacture. Maybe of use to you.

Website: http://wellbathrooms.en.china.cn

melody, November 2010

i found a guy on ebay called daywalker2008 who was very helpfull and got me the parts i needed , full marks to ebay

dave diamond, October 2010

Big thanks to Tim Beddall for this. Got hold of Primrose bathrooms and they are sending the shower door rollers by next day delivery. Hope they fit but seems likely :-)

Leigh D, September 2010

This might be of use to anybody looking for shower runner wheels

http://www.bizrate.co.uk/plumbingsupplies/products__keyword--shower+door+rollers.html

mark_northwales, September 2010

most shower doors are made to a certain standard ie 10mm securing holes, 6/8mm glass. Some have one securing hole where others can have two - so most fittings are very similar. Obviously, the same as anything, the quality of roller materials can vary.
I have found some good quality shower door rollers on Ebay ;o)

Dave Diamond, August 2010

hi folks, yep, we've got the same problem, got a Select Freya shower enclosure with sliding door, we believe that the manufacturer has gone into administration and the people that sold it to us have no answers - so we're stuck and doorless! It would seem that the only place where you can get anything remotely what we're looking for is in the USA. So much for British workmanship! But, perhaps we're wrong - is there an old fashioned ironmonger out there with a draw full of bits and bobs that would do the job?

Caz, July 2010

Hi Graham again from Scarborough,thanks to one of the answers I rang Primrose bathrooms on 0845 1300565 an got a top set of rollers 23mm. The rollers I needed were 19mm,so I took them down on a grindstone to 19mm they fit perfect top and bottom.Good luck,hope the info helps

Graham Scarborough, March 2010

I had the same trouble, I found all the bits in the runner and luck wold have it managed to salvage 2 out of the 4 to replace the 2 missing,I found that an O ring or tap washer fitted over the spindle the wheel fits on dose the job untill I find a replacement

Graham Scarborough, March 2010

There is a really good plumbers merchant in Crouch End, North London. I bought my shower cubicle through them and the runners went and they have just replaced them...

THL Plumbers, 58-60, High St, Hornsey, London, N8 7NX. 02033763024

Mark Rankin, February 2010

We need 2 plastic brackets (or runners??) for a shower door and we are not sure of the door name or make. They were 2 plastic brackets/runners that broke off. The runners are - 13/4 inches wide by 3inches long. They were positioned with a lip on the 3 inc side that fits into the metal bar that goes across the bottom of the shower. 2 screws hold the 3 inch side of the plastic piece into the metal that is at the bottom of the glass door.

JACQUELINE REDING, December 2009

hi did you have any luck because have the same problem ,searched the web but no luck

linda murphy, October 2009

PrimroseBathrooms.co.uk

0845 1300565

they stock them, I had the same problem.

23mm wheels

Tim Beddall, September 2009

hi guys,i also need wheels i managed to release two with wd40 and abit of force but still need two

derek, August 2009

You could try www.theshowerseal.co.uk. They only seem to do one sort of roller but they are the only UK stockist I can find. My shower is an Image Ultra and they look the same as the ones already on the doors. Plan to email them to ask if they would be compatible. Hope this helps...

tabbycatwantsthat, July 2009

Also need new bottom door rollers, old ones siezed and rusted.

nickcc, June 2009

Its a conspiracy of the Plumbing World. Its impossible to get spare rollers or wheels for sliding shower doors in the UK. Nearest web searched suppliers are all in the States. I dont want to need to go to Tulsa Oklahoma for a 50p nylon wheel for me shower! Stuff that. C'mon you Brits Shower Suppliers - get some in!

Angry Pete, June 2009

check this company out. I cant find the type I require but they may help somebody!!
http://www.bnl-bearings.com/downloads/APPS_12/Shower%20Enclosures.pdf

Dave, (IPSWICH), May 2009

The same as "Richard " & " Nita ". I have a Quad 1200 x 800 Cubicle & the top back runner has just sheared off. It is Chrome Frame with 4 Twin runners.
I have run out of ideas where to try next. Can anyone guide me to the best Site or Firm to get one please.

Benjie, May 2009

ditto - We need some new runners for our sliding doored shower. I don't know the make of the shower and have searched the internet but can't find anything. Any suggestions please?

richard, May 2009

oh no, i thought i was the only one with this problem. i'm looking for the same thing and can't find anywhere. somebody help us!!

Nita Vara, April 2009