When driving over rough ground cab tilt warning light comes on and its a sealed cab!! Then the lorry wont start when light is on so need to disable it.

dennis, February 2009

take of panel at clutch pedal in cab you will see a muliplug .cut the green wire .it goes to the switch

lecky, March 2009

Dennis, need to know what the model year is so I can give a fix, email me.
prcs@blueyonder.co.uk.
Lez.

Lez. T., February 2009

Hi, if you look were the cab sits in the locking brackets, there will be a wire in a plastic case going to one or both side, it should just unscrew, you may need to re connect it for the m.o.t, just make sure you don't break the wire or were it goes it the bracket, if you cab sealed down it will be very hard to fix.

Hope this helps

james, February 2009