Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Jerry asked ... Alpine 7287?    |    Guy asked ... Gaggenau fridge alarm problem?    |    Click here to ask your question

micro switch?

how do I gain access to the micro-switch on the taps & how can i gain access to the oven gas connection on a kon-tiki 640/6 which is on a talbot body.
bob watson, February 2009
TAPS ONLY:
 Microswitches
If you look under a sink or washbasin and see two wires coming from the taps, these are almost certainly connected to a microswitch. If you disconnect the wires and join them together, the pump should start working because the switch has merely been bypassed. Damp can cause the downfall of a microswitch and in some instances the whole tap has to be replaced. In most cases, however, the switch can be changed. Fitting a microswitch is usually easy; the hardest part is access. Space is tight under a caravan sink. Whale’s Elite taps overcome this because the switch is reached from above; you merely prise out the coloured hot/cold plug and remove the operating lever to reveal the microswitch. From my caravan club file.

Bob, March 2009
link Click here to see other fixes for Kon-Tiki 640/6.