On a standard wash (cottons 30degrees 1400spin 1hr 50mins ) it stops at 49 minutes and beeps/flashes E20 error. I hit the start/continue button but it stops again at the 48min time. Getting really annoying as keep needing to hit the start button again. Any suggestions?

thanks Ian

Ian, March 2009

E20 fault code is for a draining issue.remove the filter and check for blockages.once filter is removed,shine a torch inside the housing and check for fluff wrapped around the impellor.could be a kinked drain hose,blocked bottom tub hose,faulty drain pump or faulty pcb

ck, March 2009