Mike asked ... Bosch WTA74200GB Vented Dryer?    |    Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Click here to ask your question

how do i fix hotpoint aquarius wma 35?

the drun has stopped moving round but the motor is still working the drum looks to be stuck and will not move at all
Nijel Roberts, March 2009
sounds like either trapped clothing around the spider at back of drum or bearings seized more than likely the bearings in my opinion ... check for clothes trapped around heater by removing one of the paddles pull towrds you it will unclip ... ALWAYS UNPLUG FROM mains before tampering ...

sharky, March 2009
assuming no clothes have been lost between the two drums sounds as if the inner bearings race has collapsed and picked up and jammed the drum . Remove power try to rock the inner drum either way till free, when free check the inner drum for up/down movement, excessive movement indicates bearing failure.

wirecutterman, March 2009
thanks but the belt is just spinning on the seized drum does not move

Nijel Roberts, March 2009
belt problem, either loose/snapped or jumped off the pulley
remove the top of the machine to see the problem.

wirecutterman, March 2009
link Click here to see other fixes for Hotpoint Aquarius.