GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

Scooter missfires and stops when hot?

Gilera Runner zx125
Starts ok and runs normal for about 2/3 miles then begins to missfire and stops altogether. Starting is difficult and works again for a while before playing up again. A good spark is observed, the fuel is ok and the air cleaner serviced.
any ideas appreciated
John, March 2009
thanks i cheak that but wat pipe u recone were is that pipe by the little take that is full of petrol

michael, April 2009
the actual fault was===the pipe was split from the vacuum fuel pump , thus fuel delivery could not keep up at speed.
Simple wasnt it when you know

john, March 2009
Any help i got the same problem with my bike is the primary ignition coil the one attached to the spark plug lead or the cdi and help appreciated

Michael, March 2009
sounds like a primary ignition coil seperating when it gets to a certain temp i have seeen this problem before on several scooters,replace it as its the only sure way it will spark still outside of the engine but will fail under pressure when fitted back into the head.

adam bike doctor, March 2009
Thanks for that but this pm have found a hole in the small pipe which connects to the head near the exhast pipe, this pipe goes to a unit situated to the rear right side of the engine. God knows what this unit does but is it significant? The bike is a 125 4 stroke.

john, March 2009
sounds like ignition coil faulty. it would spit and stop. if it was fuel starvation it would die out smoother. if its a high mileage 2 stroke then it's almost certainly worn rings/ cylinder bore. chainsaws do that when old.

bombalino, March 2009
link Click here to see other fixes for Gilera.