andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Click here to ask your question

'handbrake on'?

i have just changed the rear pads on my peugeot 807 after the handbrake on light and buzzer keep going off they were low, thinking this was the problem changed them but now the light gone out but comes back on after a little driving, is there a sensor there somewhere on the axle as the pads have no wear indicator on them
stuart, March 2009
the front pads are okay, the brake fluid is okay and quite easy to get to. is there any sensors on there, checked the handbrake cable and switch etc

stu, March 2009
try topping up the brake fluid good luck its almost impossible to get at the fluid bottle located on passenger side under bonnet also check front pads not worn out

pmt, March 2009
oh my god i didnt know that anyone could be so thick but you have proved me wrong !!!!

ivor bigen, March 2009
link Click here to see other fixes for Peugeot 807.