Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Ian Scott asked ... Remove cover off gas boiler?    |    Click here to ask your question

Veritas 8 - engineer code and power down?

I've just moved into a house and the bedroom cannot be omitted so I am unable to set system at night. I realise I need the engineer code to change this from a 24 hour zone to a guard zone but don't have it and letting agent are not able to get it for me. I've seen that the system needs powering down to reset the engineer code - is that correct? If so, how exactly do I power down as I can't find the socket or switch that relates to the alarm to be able to turn it off or is there some other way of powering down?
Confused!, March 2009
ive opened my veritas 8 box to change the battery but now the box shows all zone lights and the box keeps beeping what can i do?

jamil yusuf, November 2012
The default engineers code is 1234 and the default user code is 4321 or the other way round on some units. The power should be from a fused spur point somewhere near the control box (not the keypad if remote), but remember the internal bettery will still power it without the mains.
I've got an installation manual in PDF format for the Texecom Veritas 8 that gives the instructions on what you want to do. I got it after being held to ransom by the local alarm company who'd changed it but wouldn't tell me the number for security reasons (found that was due to them using same number for all the alarms they "serviced" - some security!).
If you'd like the installation manual emailed to you then just text your email address to me at 07801 933766.

Stephen, March 2009
Hi, Give me a call and I can tell you what you can do, it will only cost you the price of a phone call, BUT PLEASE ONLY RING BETWEEN 6pm & 9pm ONLY.

Joe, Alarm Engineer, Skegness, 07525922917., March 2009
link Click here to see other fixes for Veritas 8.