Hi, i need an operators manual for the above machine which my father has acquired, the engine no is Van 148, E36142D, S0049A - can you help ? or do you have a copy you could send to me?

Sarah Neill, March 2009

4 strokes don't used mixed fuel - straight unleaded will be fine.

Don't forget to check the oil level in the sump before each use.

Phil Saunders, March 2009

Thanka for that, my dad has managed to get it going now !! can you advise on what thew fuel mixture should be for this 4 stroke model number Van 148 E36142D, S0049A?

Thanks

Sarah Neill, March 2009

Check sump is filled to the correct level with correct oil.

Fill fuel tank with fresh unleaded petrol

Press the primer on the side of the carburettor 6 to 10 times

Set throttle speed (where fitted) to high position.

Pull in safety engine cut-out lever (opc) if fitted.

Firmly grasp the recoil rope handle and rapidly pull towards you until engine starts.

To stop engine simply let go of safety cut-out lever.

pleasant, March 2009

My dad needs to know how to start it up

sarah neill, March 2009

There isn't one. Why do you need an operators manual for a performance power?

pleasant, March 2009