Mike asked ... Bosch WTA74200GB Vented Dryer?    |    Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Click here to ask your question

Hotpoint CTD85A F15 Fault not enough heat?

How can I fix this problem have checked heater elements and have approx 24 ohms across each of the 3 elements and have checked resistance across the 3 thermostats the black one with a reset is approx 0.5 ohms the white one in the middle is 36k ohms(connected to pins 1/2 on socket at relay board red and black cores) and the black one without a reset is 0.5 ohms(both the black thermostats are linked in series). Should the white thermostat be 0.5 ohms or is this a Normally Open when the other two are Normally closed ?
Leigh, March 2009
link Click here to see other fixes for Hotpoint.