Mike asked ... Bosch WTA74200GB Vented Dryer?    |    Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Click here to ask your question

Air in the radiators?

We have just had a cobi boiler fitted, but the up stairs radiators have to be blead all the time because they are cold at the top when the system is turned on.
kelly lowery, March 2009
close all rad valves,then open one at a time little bit first one nearest the boiler then work away from boiler open bit more each rad till the last one is open fully,then bleed rads

me, March 2009
hi look out side where the boiler is fitted you will see a discharge pipe if this is leaking then the pressure will drop ,
it is called a pressure relieve valve,if no leak, the problem must be under the ground floor in the pipe work

chris nort london, March 2009
Once they have been bled that should be it. Does the combi pressure valve drop and needs to be re-pressurised regularly. If so, you definitely have a leak on your sytem somewhere.

Nick from sunny Sale., March 2009