Pam asked ... Do I need to open the housing to dry the motor?    |    James asked ... Remove enterprise enrolment from an Asus Chromebook C523N?    |    tom schwartz asked ... Bosch maxx 6?    |    Noman asked ... Reverse light switch?    |    Suzie asked ... Stuck Feed dog?    |    Click here to ask your question

How can I fix my Rally mower?

My Rally sit on mower powered by Briggs and Stratton 12hp only clunks when electric start key turned. By passing everything by connecting positive pole of battery to starter directly turns over quickly but won't start. Whats up
Steve Draig, March 2009
Sounds like your starter solenoid swith has had it.
When you said it cranked over quickly, but would not start, was your ignition actually switched on?

Try again leaving the iginition switched on, then run a temporary connection direct from positive terminal on battery to the starter motor connection (ie hot wire it). The motor should crank and should start.
If it does run as normal, then most likely your starter solenoid needs replacing. The metal contacts inside it will probably have burned out or got pitted.
I've had a Rally ride on for 12 years and had to replace mine years ago.

Steve, April 2009
link Click here to see other fixes for Briggs & Stratton.