we have got a beko wma 1715s the prewash led started to flash mid cycle and now we can't use the washing machine my husband has cleaned out the pump which he thought might have been obstructed is there a more serious problem with my machine

Sonia powell, January 2006

I have the same problem. The reset thing seems to work if I persist going throught the process several times. But then when I put in another wash the process has to repeated again. Also it seems the wash sometimes stops before clothes have been rinsed so I have to put them on a rinse cycle. This is all VERY tedious and I thinking of getting a new machine.

Joe, May 2006

This reply has been posted elsewhere on the forum, I have just used it and works perfectly.

Have had the same problem, prewash light flashing right hand side of machine. The shop I purchased machine from have spoken to their Engineer and it's a case of re-setting the machine. Have told me how to do it and the machine's working again - fingers crossed!
Turn power button off (not at wall)
Select 90 degree wash
Press Start and Cancel button down at same time for 3 seconds and turn power button on whilst still holding buttons down - Start light will flash.
Leave power on.
Select any Spin position.
Press Start and Cancel button at same time again for 3 seconds - other buttons may start to flash - if they do, press Start and Cancel button together again for 3 seconds.
Machine should be re-set ready for use.
Good luck!

Nikki, January 2006

I also have a beko wma17155 and I am experiencing the same problem, have you solved yours.

nmcollman@aol.com, January 2006