Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    Click here to ask your question

Chainsaw chain?

My chain jumped off the arm and now seven links won't go back into grove on arm. Have I stuffed it? Is it fixable?
Steven Dodgy chainsaw operator, April 2009
agree with Pleasant or you user name might be Steven DEAD chainsaw operator!
Call ALM Manufacturing 01423 797208 for details of new chain stockists

Richard, May 2009
The seven drive links have been damaged when the chain jumped off. NEVER re-fit a chain in this condition- replace it will an new one and adjust accordingly

pleasant, April 2009
hi steve,as you look at the chainsaw arm you should be able to see two nuts(13mm)then look to right of the nuts should be a screw undo the nuts slightly & then turn the screw,this should move the arm in/out to help refit the chain.hope this helps

steray, April 2009