How do I remove an old zanussi w/dryer Turbo dry.
Have unplugged, removed waste water pipe from sink sprigett. Do the hot &cold water connections come off the W/D machine- (for use with new machine )or do they disconnect at the copper feed pipes at the wall.
I cannot get the tubes to unscrew at the junction with the W/d machine so I think I must disconnect at the wall pipes. New machine not here yet so I cannot see if it comes with both water connections and the drain pipe. What is best tool to separate the water hose connections? Thanks
Rally

Rally, April 2009

a pair of adjustable pliers,isolate the POWER then isolate BOTH of the WATER SUPPLIES before attempting to undo the H/C connections on the rear of the old machine, when both pipes disconnected now drain MOST of the water out of the machine by lowering the drain hose into a low bowl container, when stopped take machine outside.
New machine will come with NEW HOSES If happy reuse the old one but use new rubber washers,( keep new as spares)

wirecutterman, April 2009