whilst in the middle of a run by treadmill came to a stop, yet the LCD display works fine and continued counting down, i turned everything off and disconnected from the mains for 30 seconds then turned it all on, Lcd display started counting but the Belt failed to move am presuming its the Motor or something has come loose. Please advise suggestions Thank you.

matt lane, April 2009

My irun when switched on starts at top speed and won't slow down

Garry westwood, June 2017

Why my treatmill show E5 code on console on I-run? Every time I start run on fast speed then stop every 2 mins?? Any help?

Paul day, February 2015

I have lost the key for my can run walk tread mill ,how can I get a new one ? Thanks

Jane, January 2014

tread mill reebok edge, running belt wont move at all why?

pauline, August 2012

Hi there I have a reebok treadmill. And when I adjust the height it moves up and down fine. But when I set the programme to go. The belt does not move but makes a noise. I thought it might be the motor but I've changed it but it just did the same. Any ideas?

Lee, August 2012

the rubber has come off the big wheel and little wheel

angela williamson, July 2012

How do I hold the drive wheel in place. When turning the speed up the belt runs and then all of a sudden stops. The rubber drive belt has managed to come off the bigger wheel which has also moved.

Andy, July 2012

the safety key keeps popping out - what can i do

JJ, May 2012

Same probs as all the others treadmill works for approx 25-30 mins then stops dead the screen is all on and the counter still going brushes are fine belt is moving manually but no go in the motor any engineers out there to help motor is not seized up

dave in newport, July 2011

I currently have the same problem but the LCD display counts down the speed as if I'd pressed the stop button!

Ive read that this is either a lube issue and/ or brushes in motor need replacing, will keep you informed how i get on

benlamd, August 2010

my reebok i-run also suffers from this problem of slowing or stopping mid run, whilst everything is still operating. i have spoken to an online treadmill engineer, who says that it is most probably caused by a lubricant problem on the running deck, but it is worth checking the motor brushes aswell

dave, February 2010

My Reebok Fusion Treadmill from Argos has done the same thing - it stops during a running session, usually but not always, at faster speeds. The belt stops dead, very suddenly and without warning, although the LCD remains lit and the counter keeps counting. Not impressed.

Jim McBob, May 2009

The exact same thing happened to my Reebok i- run last weekend.

All these treadmills come with a 2 year manufacturer warranty "just don’t tell them if it’s 2nd hand".

They will require the following information

* Machine -
* Serial Number -
* Purchased From –
* Purchase Date –

Serial codes are found at the front of the machine, this should also have a manufactured date here to.

I have attached their contact details:

RFE International Ltd
Tel: +44 (0) 871 474 2614
email :techsupport (at ) rfeinternational.com

They do have an email address but this form will not allow me to put this on. "so I have tried to cheat this system"

Good Luck

Chris, April 2009