GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

John Deere LT160 not start, battery is fully charged (100%). ?

My son was using the tractor and it was running fine. At one point when he went to restart the engine it would crank but not start. I jumped it and it started. Eventually it got to the point where it wouldn't crank and now it only clicks when I turn the ignition key and won't crank when I attempt to jump it. For whatever the reason, the (condenser?) at the bottom of the carburetor gets quite hot. The solenoid coming off the battery seems to have activity when the ignition key is turned, it feels as if it is operating...but when a volt meter was put on the solenoid it showed 12 volts going to the solenoid but zero volts exiting.

Thanks,

Rob
Rob Diehard Whaler Fan, April 2009
John,

Thank you very much for your advice to replace the starter solenoid. I changed it today (4/30/09) and it starts!!!

Thanks Again,

Rob Diehard Whaler Fan, April 2009
Replace the solenoid that controls the starter motor - I guess its internal contacts have burnt away. On the large terminals, you should get 12v in from the battery and 12v coming back out again, but its best to disconnect the starter for this test. The other solenoid on the bottom of the carb is a fuel shut off and it does get warm - but not so hot that you could fry chips on it!

John, April 2009
link Click here to see other fixes for John Deere.