I have bought a replacement relay switch for a Creda T620CW tumble drier. I assumed, perhaps wrongly, that all I had to do was to remove the top plastic fascia to swap in the new switch. I located two screws under the timer control and removed them. However when I tried to prise open the fascia it refused to budge. Are there other screws I don't know about? Do I have to unscrew and remove the entire front panel? Any help would be appreciated.

James Kyle, January 2006

Remove the top and side panels, unscrew the top screw on the two top support arms, you should then be able to prise the front away. if not undo the 4 screws located behind the door. on refitting locate the latch spring on its boss(top of door) and you have to locate the condenser into front panel.

dave m, May 2006