Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Ian Scott asked ... Remove cover off gas boiler?    |    Click here to ask your question

missfire on omega v6?

my 98 omega v6 just developed a missfire. had cat replaced, feul filter, leads and plugs. still happening, what else could this be? hopefully not an ecu problem
t gilks, May 2009
was the coil pack or dis pack, now runs better than ever, thanks shaun.

t gilks, May 2009
sounds more like a head gasket fault, first run the engine till warm then remove the plugs, they should all be hot, a cold plug means that cylinder is not firing, check for water in the oil, you will get a deposit on the oil cap, if any of these are apparent sounds like head gasket issues, is it using lots of water??

chunkyfluid, May 2009
hi the commen problem is the coil pack breaking down,which is located on the back of the passenger cylinder head and its a basterd to get to aswell.

shaun., May 2009
link Click here to see other fixes for Omega Omega.