Mike asked ... Bosch WTA74200GB Vented Dryer?    |    Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Click here to ask your question

How do I set clock on Belling Synergie oven?

I inherited a Belling Synergie with no instructions! Since a power cut, I haven't been able to set clock, only cooking time which seems to go off all the time. Can anyone help?
Jennifer Sutton, May 2009
spot on. worked perfectly for our unknown model of belling. only difference was ours was a rotary knob for plus and minus, but the 2 button part was the info needed. And yes, I had to switch off and on again to get to it as all our messing around had locked the time in wrong initially. dont forget its likely to be a 24 hour clock

thanks, November 2010
If the cooker timer has a row of buttons underneath and the numbers are flashing do this...

Depress and hold in buttons 2 & 3 from the left and use the ± buttons to set the time (any time will do) and then release all buttons. After a few seconds the clock will show the time you set and the oven should work.

If the clock numbers are not flashing turn the power to the cooker off and back on again - the colock will flash - asking you to set the time...

Peccavi, May 2009
link Click here to see other fixes for Belling.