andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Click here to ask your question

How can I get my clutch to disengage?

My 1961 Ford Model 641 clutch will not disengage in neutal or in reverse or in any other gear. It is as if the clutch plate and flywheel are suddenly fused together. Is there a way to cause the clutch to release or must I take the tractor in for a new clutch?
Ross, May 2009
Does the clutch feel as though it's working when you press the pedal?
If so, its possible that the plate has stuck to the flywheel as you suggest. If you have room you could try starting up in gear, the higher the better, and while driving with the clutch held down, snatch on and off the throttle. This will usually jolt it free. Otherwise, towing in high gear, again with the pedal held down may also work. If trying this approach, make sure the engine cannot start. Be careful whichever way you try!

Tom, June 2009
link Click here to see other fixes for Ford 641.