Lou asked ... Mac Allister 35cm electric lawn mower?    |    Ronald Charlwood asked ... Beko fridge/freezer not cold enough?    |    John Broadbent asked ... Advise?    |    suzy asked ... Brother kh-940 not in sync with DAK9 in interactive knitting?    |    Susan asked ... How can I stop my steam iron spraying water with the steam?    |    Click here to ask your question

Replacing front wheel bearing vauxhall omega 2.0ltr?

Is it a big job to replace the fron wheel bearings on a Vauxhall Omega 2.00ltr estate car
Glyn, June 2009
I recomend you untighten the hub nut with car on floor before removing anything else, the hub nut is very tight approx. 250lbs/ft. torque. you will need a great deal of leverage. Otherwise the job is quite straight forward, about 1.1/2hr or so.

ericn, March 2011
On 2001 DTI I fitted a replacement hub complete. About an hours job and about £80 from local factor. Wheel off, remove caliper (two bolts) remove brake disk ( one star drive) and then remove the big bearing retaining nut, Strait forward enough?

fergyhr2, December 2009
link Click here to see other fixes for Omega.