jus wondering if any1 could help me? my belt drive broke and i replaced it and it works but there is now a clicking noise come from inside the belt drive/clutch/virator casing. the bike also seems to not have as much power an isnt as resposive to the throttle.

gary white please help, June 2009

This happens to me aswell is it when your just ticking over comin off the revs?

Hollow94, July 2009

hi gary, whip off the side casing & check your rollers are sitting properly in the variator. when you've reassembled it, check both clutch & variator are bolted tight & that the drive belt is sitting squarely between the two pulleys. after you've done that, make sure the casing is sitting properly on its dowls & kickstart mechanism, press down slightly on the kickstart with your hand & press against the casing at the same time, you should feel it slot into place. tighten the casing in a sequence, if you start at the top of the casing then tighten the opposite bolt on the bottom & work your way around evenly. hope this helps.......happy motoring.

steo, June 2009