When switched on at printer the green "power-on light "and the three "paper/ink" red lights blink continuously. Printer will not respond to "Print" instruction.

Hoppy Heswall., June 2009

Im having this problem with my stylus photo r200 i turn it on then the on button goes out and the paper jammed and ink lights flash continuosly can anyone help cause ive tried the ones above but with bo joy

Allan, June 2009

What do you know. Actually it was on this site!
The printer is "de-programmed" and can be reset to "Out of the box" factory default settings by following these six steps:
1. Turn printer off.
2. Press and hold both the "Load/Eject" and the "Cleaning" buttons.
3. While holding these two buttons, turn the power back on and continue to hold.
4. Count five seconds.
5. Release the two buttons and then press and hold just the "Load/Eject" button (withe some models of the E750 the necessary button may be the "Cleaning" button).
6. Continue to hold "Load/Eject" (or "Cleaning" respectively, see step 5) until printer's lights flash, then release button.
Printer should now be reset and the "Hidden Counter" of which's existance conspiracists pretend to know is set to zero again.

ci21, June 2009

The problem happened to me once. It can be overcome by pressing a combination of buttons on the printer. Unfortunately I cant remember which! I got the answer from "googling" the problem and I got it from a similar sounding named site to this. Sorry I can't be more specific but the problem can be overcome>

ci2i, June 2009