Hi all I have a Triton electric shower model Martinique. In the summer I usualy have it on about setting 3 -4 for decent hot water. The other day it suddenly went red hot then freezing cold, since then I have to have it set on 8 to get any normal hot water. If anyone knows which part would have gone faulty? and were is a reasonable place to buy from? As a point of not above the heater can assembly there is 4 conections 3 with solid plastic and one a piggy back connection (with 2 wires on it). This piggy back connection had rubber sleeves on it that had been scorched/melted/burnt. It seemed the wires get hot there and the conections (from the supplier) unsuitable for the purpose. Ive repaired this, but wondering if anything could have arced out here?........Thanks in advance for any help ;-))

Glenn, June 2009

When the shower was running I heard a pop and water started blowing out through the small drain tube. I assume it may have been over pressured as I had the shower running cool so more cold mains pressure. Could it be a safety valve or 'o' ring blown? Robin

Robin, July 2017

Hi I'm having a problem with my shower,when I press the to swith on,it flicks to pressue problems,can you help

phil cassidy, February 2017

It keeps flicking from hot to cold

debbie, December 2014

shower cold low pressure indicator

eddie, October 2010

Hi mate I am having the same problem - did you solve it?

Aaron, October 2009

for your info, the inside of my shower...
http://www.shower-spares.co.uk/triton/triton_martinique.htm

Glenn, June 2009