1 hour ago andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Click here to ask your question

my push mower will crank but it will not stay running what is wrong with it?

my push mower will crank but it will not stay running what is wrong with it?
bob, June 2009
most probably a simple fuel starvation caused by dirt or old fuel in the carb.
-for carbs with float bowls (honda, tecumseh, some briggs, some mountfields) -remove the carb, remove the bowl/float+needle/main jet, blast the whole lot with carb cleaner and if possible finish with a blast of compressed air over all the carb parts and the carb itself including through all the openings in the carb, then reassemble.
-for briggs classic with the tank top plastic carb, you need to replace the carb diaphragm.
this should get ya going again.
this problem is usually caused by dirt blocking the main jet on carbs with floats and bowls. or caused by an old worn or baggy carb diaphragm on the briggs.

Andy Lee, June 2009