Jon asked ... How do I remove the flywheel. Mountfield 1640h ride on mower?    |    Keith Mumby asked ... Fordson starter solenoid?    |    Suzanne asked ... Washing programme stops after 3 minutes?    |    Rif asked ... Kenwood Dishwasher KID60S20 leaking from front?    |    Fraser asked ... Spares for power craft ppcs 38cc?    |    Click here to ask your question

AEG competence thermometer problem ?

my oven switches off after about 40 mins at 180 degs, if its at 150 degs it lasts an hour. The problem exists even if I run it on the non fan setting. could it still be the fan thermostat is faulty.
Any help would be very much appreciated.
tony, July 2009
I have taken the cover off and sure enough the part you are talking about it very brown within the torpedo shaped plastic section. now my delema, there are two blue and two white wires, which goes to where when i put the new one in.
I cannot see inside the component to work out where they go.
Thanks,
Tony.

tonypolony, July 2009
thanks for the help. its B3101-1.
thanks, Tony

tonypolony, July 2009
you haven't put the model details down but if you remove the top cover nearest the front control panel on the oven and look at the cut in stat that controls the cooling fan you might find it is all burnt and brown.has 4 wires coming from it and looks torpedo shaped.will be cable tied into the wiring loom assuming it is one of the models that have it fitted

ck, July 2009
link Click here to see other fixes for AEG.