Liam asked ... Belts for old WEBB Mower?    |    Leith asked ... Bosch Classix Type WKM41 front loader washing machine?    |    Pam asked ... Do I need to open the housing to dry the motor?    |    James asked ... Remove enterprise enrolment from an Asus Chromebook C523N?    |    tom schwartz asked ... Bosch maxx 6?    |    Click here to ask your question

How can I fix Zanussi DWS919?

The machine stops completely after the tablet is dropped into the machine. Plenty of water getting to pump unit at back of machine, but no water is getting into the Dishwasher itself. No visible blockages anywhere. Seems to run dry then switch itself off. Any suggestions gratefully received. thanks.
Rossco., July 2009
Yippee it works. Just clear all the pipes by blowing down them. Connect it back and away you go. Cheers dude. Owe you a pint.

rossco, July 2009
Thanks ck for the help. Unfortunately i'm no plumber. The cold water feed goes into the pump at the bottom RHS of the machine. From this pump unit is a blue pipe which runs into the machine. Is this the pipe that needs disconnecting and clearing? Many thanks again for your response. Rossco.

rossco, July 2009
remove the valve from the back of the dishwasher where the cold inlet hose attaches.once inlet valve has been removed you will see a hose connected to the inlet valve.disconnect it and blow down it.now refit and try.

ck, July 2009
link Click here to see other fixes for Zanussi.