I HAVE AN INDESIT DI620 DISHWASHER AND NEED TO REPLACE HANDLE ON WOODEN FALSE DOOR BUT HOW DO I GET IT OFF.I KNOWW THERE ARE USUALY SCREWS INSIDE TO LOOSEN IT BUT WHERE ARE THEY.

ALSO.
DOOR IS LOOSE IN HINGE ON RIGHT HAND SIDE.SOMEONE SAID THE DOORS ARE MEANT TO COME OFF AND I MAY HAVE PULLED IT OUT .ANY IDEAS??

THANKS
JOHN

JOHN HARPER, July 2009

My mistake MATT not John great instructions thanks

Sue, April 2021

I’m a 64 year old lady and have followed what John says. HOORAY I did it!
Thanks so much John

Sue , April 2021

Thank you Matt McKean. Also there is Velcro attaching dishwasher and kitchen door. After removing the screws as mention by Matt, i had to pull the door outwards, so that Velcro is detached and then slide it down.

Saurabh Kothari, January 2021

Thanx from Holland, Matt. I have the original instructions here, but those drawings didn't make me any wiser. Fixed it now. Many Thanx.

Jack de Koning, March 2019

Thanks to Matt

I have also just removed my wooden door after about 30 minutes trying various things. Who would know that it was the first and third screws out of all of them present.

I should have looked on internet earlier,

Cheers, John

John, June 2017

Thanks Matt M - spot on answer. Even knowing about the catches at the top I had a serious job getting the front to move. I worked out the screws but if you hadn't explained about the Velcro & catches I'd have been resorting to a crowbar and needing a new door!

Nik, January 2017

Excellent description. Exactly the same for my DIR04. Thanks

Richard, September 2015

Thanks Matt

steveodon, September 2014

Thanks Matt McKean, have been struggling for ages and also checking internet and finally finally found your absolutely excellent description of how to do which worked absolutely brilliantly! Thank you!!!!

Nicola, August 2014

great description!

Lynn, December 2013

Great description Matt,

Regards, Phil

Phil Hughes, October 2013

Thanks Matt

A spot on description of how to remove a DI620 door.

homer, April 2012

Thankyou

Phil, January 2012

When you remove the screws it is held on with velchro. You have to rip the door away..that is maybe why you think it is still attached after you remove screws.

andy, October 2011

Hi.. Ive just done this on my Indesit DI620 and after trawlling the internet and not finding how to do it, i thought i best add it so others dont struggle.

OK.. if you stand in front of your dishwasher and open the door you will see 4 small Cross Head screws down each side of the metal frame on the inside of the door.

From the bottom of your door (closest to the hinges) unscrew the 1st and 3rd screws. These Should be Wood Screws of about 1 1/2 inches long. Do this on both sides.

Then slide the Wooden door front downwards (towards the floor) The Wooden door has two pegs that locate to the Washer door, that when slide downwards allows the door to be removed.

Hope this is helpful.

Matt McKean, January 2011

Hi John, Did you ever figure this out ? I have the same problem, I can't remove the door. Thanks

Kristina, June 2010