GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

how do I unlock my kenmore dishwasher?

The lock on light is blinking, and it won't allow me to press start. I push and hold the button it says to hold for four seconds, but it doen't unlock.
kurt coulon, February 2006
on my model i held the air dry button. very helpful site! i'm so happy that i don't have to handwash my dishes!

Genie Hill, December 2012
I cannot get my "lock" light to quit blinking, therefore, it is not letting me do anything with any of the controls, such as START...HELP!!!

Debbie, June 2012
Thanks so much!!! I unlocked it by pressing the heat dry button.

VMK, December 2011
Thanks! Holding the heated dry button worked for me too :)

JK, July 2011
thanks it worked great and just spent $200 on new disposal not counting plumber and all I needed was more money on the dishwasher.

all thumbs, February 2010
I can't run my kenmore dishwasher. It seems to be in a lock mode.


Help

Bernadette Davis, December 2009
love you guys!!!! it worked!!!! I thought I was going to need a new washer or get this fixed, and financially, NOW is NOT the time!!!

grateful, November 2009
Thanks to the author of this answer. I have tried to two days to unlock my kenmore dishwasher! Thanks for such a quick fix. The heated dry button worked.

s.family, June 2009
Same problem with Maytag. Holding in the heated dry button worked, in 3 seconds!

Dottie, December 2008
press and hold the 'heated dry' button for 4 seconds
it will go off...

( 4 seconds is longer than you think.. wait for it! )

Regards,

Phil Dalgleish, September 2008
just hold the "heated on" button until it goes off.
it should take about 5 or 6 seconds.
good luck!

alex smith, July 2008
I had the exact same problem! The lock on wouldn't stop blinking. I tried evrything and then I decided to leave the door open so I didn't have to look at that annoying red light. About 6 hours later I was showing someone. I closed the door. the red light appeared, and then I hit the "no heat" and this time it went off!! Apparently, leaving the door ajar for a period of time resets the controlls> Good Luck. I certainly did not receive ANY help from Sears. THey wanted to charge me $69 just to look at it! Grrrrr.

Ann in Fresno, February 2006
link Click here to see other fixes for Kenmore.