ok first remove the spring on the outside of the door seal. next at the bottom front where the flap is for the drain pump there is a screw remove the screw and then remove the whole cover. next there is two screws at the bottom of the panel and one up top under the soap draw remove the three screws. now unclip the rubber seal from the panel,remove the panel and unclip the wires to the door switch. now there should be another spring holding the seal to the drum remove the spring and unclip the seal. then install the new one hope this helps let me kwon how it goes,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
baldyjoe, July 2009
