GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

how can i stop my peugeot 106 xnd graduate L reg from not turning off?

i have a peugeot 106 xnd and the problem is that it won't turn off! i have to stall ti to shut the engine off, any ideas or a easy fix?
Mark Slade, February 2006
If it carries on running normally when you switch off, it could be the fuel solenoid on the injection pump sticking. Switch the ignition off and disconnect the connector from the injection pump (black connector), if it still runs then its the solenoid, if it stops then you have an electrical problem which is supplying an ignition feed to the solenoid when it shouldn't have one.

Mark, February 2006
Have a chat with your local car spares shop as it sounds like carbon build up on the pistons causing 'overrun' ie: Engine still fires due to the carbon being so hot it causes re-ignition. I had a motorcyle that did that and I used to drive it for about 1/2 mile [just for fun] with plug leads off eventuallly it stopped when the carbon cooled through air cooling and no spark to keep it going.

Eventually your engine would stop without stalling as the carbon cools off. Motor shops sell what I think is red ex it's an engine cleaner. Be warned it don't half give off a lot of white smoke, I know I've done it. Then again follow what the shop advises as things may have changed since 1997. also again they may have something as an additive to fuel which would prevent any re-occurance.

Bob

Bob, February 2006
link Click here to see other fixes for Peugeot 106.