Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Ian Scott asked ... Remove cover off gas boiler?    |    Click here to ask your question

Please assist us in repairing our KENMORE Ultra Fabric Care Electric Dryer?

Trying to repair possible fuse and/or heating element problem, but am in need of a diagram/manual of the dryer itself to find out where the fuses are located and such. The dryer runs, temperature selection is accuarate, but the heat output is extremely weak, taking 2 hours to barely dry one normal size load. Where and how can we obtain a free diagram/manual for this dryer?? And are we on the right track as to what the actual problem is with this dryer??
Veronica & Gary, February 2006
Hello,

If you have "good" heat inside your drum, then it sounds like you have a blocked up vent or the blower wheel at the end of the motor is covered with lint. Try drying a load with the vent completely off to see if that changes things.

JP, February 2006
link Click here to see other fixes for Kenmore.