Hi, I have an AEG Lavatherm 57700. It operates for approximately 10 seconds once you start the cycle, and then stops, indicating a "Clean Filter" error. The filter and filter housing have been cleaned, the condensor is empty, the drum turns and the heater works.

Any assistance will be much appreciated.

Koos, July 2009

A less ambitious solution is to knock on each of the (5) relays on the control board for a while to "repair" a probably stuck relay and try to run it again. It worked for me and the condensor runs like new....again...for a while;-)/Cheers

Lasse, October 2012

Anyone who has solved this one as I have the same problem

Gert, May 2012

Hi, did you ever get the answer to this as i have the exact same problem.

Thanks

Andrew Watts, June 2011