Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Mike asked ... Bosch WTA74200GB Vented Dryer?    |    Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Click here to ask your question

no oil getting to boiler?

just had pump replaced and tigerloop fitted , orks for 3 days then oil level drops to zero in tiger loop

any ideas my boiler man is struggling too and the bill getting larger
gary, July 2009
Check and DOUBLE Check all compression fittings especially those above the oil tank level, as these if not tight will not leak oil out but will draw air in and cause excess air in the fuel system and reduce the required Vaccum necesssary to allow the system to operate, just a thought has a By-pass plug been fitted to your repalcement oil pump? it won't work without it

www.elanar.co.uk, July 2009
Presumably the tank/water trap filter is clean at the tank end? Fire valve fully open (but not leaking) etc?

John, July 2009