could you tell me how holes are numbered on head please w reg clio 1.1 .8 valve

alan, July 2009

Hi Alan, first you MUST use new bolts!!
1) torque to 20Nm
2) then +90 +/- 6 degrees
3) wait 3 mins ??
4) slacken bolts 1&2 re-torque to 20Nm then +200+/_6
5) repeat (4) for bolts 3,4,5&6
6) repeat (4) for bolts 7,8,9&10

Bolt sequence
8, 4, 1, 5, 9,
xxxxxxxxxxxx flywheel
7, 3, 2, 6, 10

nigel, July 2009