Baumatic Black Ceramic Hob. Red 'L' light on all four hob lights?
A red 'L' indicator shows on all four hob lights when switched on. What is 'L' and how do I get the hob to power up again?
It was working fine yesterday.
Is the hob child-locked? If so, how dow I release it?
Pressing the bottom right and minus togetherthen minus on it's own within 10 seconds. Thanks everyone!!!
Nicola, July 2017
Thank you so much. Hob is working again.
Alasdair, April 2017
Thank you so much, it worked for us too!!
Henriett, March 2017
baumatic black ceramic hob showing all 8s help
carl, December 2014
It worked for me. Held the bottom right and the minus then the minus within 10 seconds. Sorted.
Norman Bateson, September 2014
im trying to find where i can buy the EMC+POWER PCB for an Baumatic BH1615 induction hob as mine had thrown a wobbler
george, July 2014
I just had this problem too, it works!!!! Fantastic, thank you!
Lou, March 2014
thanks a million spot on and now fixed
2intrepid, September 2013
I had the same problem showing Ls & yes this was rectified by holding down the bottom right & Minus at the same time then minus on its own.
Many thanks for your help.
Roger, October 2012
Hurray.. it helped me a lot.. thanks a ton
REnjith, January 2011
thanks, happen to mine last night. Mines a Zanussi and when L's are displayed on all 4, I also touched bottom right and minus at the same time and it worked ...... Great Site . Thanks Again.
Stevie C. Northern Ireland, April 2010
I just have pressed theses bottons and nothing happened. shows 3/0/E on each part. do I need to press anything else to make it unlock?
lina, February 2010
hold down bottom right button and minus button at same time then hold down the minus button alone this should take the lock off. needs to be done in 10 seconds, hope u have sorted it
sally, September 2009
hi mine did this last night just found and answer and it worked on mine,turn it on when Ls come up try holding down bottom right and minus at the same time, mine unlocked, seems to be locked everytime i turn it on but if i press those i get it working, hope it works.
