GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

IVECO 75E14 WONT START?

I HAVE AN IVECO 75E14 THAT I HAVE PUT ON A RECON FUEL INJECTION PUMP, BUT CANNOT SUCESSFULLY BLEED THE AIR FROM INJECTORS, AND WONT START. IT IS A BOSCH PUMP
LEE225, August 2009
ive just done a head gasket on one and had the same problem make sure you hav diesel at top of injectors all 4 remove air intake pipe of manifold squirt in some easy start it wiill fire up.

ash, October 2009
Check the fuel return out of pump has a restrictor in it.
Banjo bolt has very small hole.Any problems ring Richard 07770591462

Richard, October 2009
you can take stop switch out and it should start then you just need to stall it to stop it

worzel, August 2009
Slacken a couple of injector pipes at the injector end and jazz it over. if no fuel appears try the stop solenoid, as previously suggested. If u have fuel and no go, give her a blast or 2 of easystart. Still no joy, check ur timing.

Keith, August 2009
fuel to pump yes , eletric stop
try the stop unit , make shure it is open,
take wire off,,, with the ign on touch the wire on and off to hear if it is working , you should here a click
if not remove the unit , take out the small piston , replace unit , (should be small spring and piston ,note how it is fitted)you will have to stall it , replace the unit ,

harry, August 2009
link Click here to see other fixes for Bosch.