home Fix label Household Appliances label_important Tumble Dryers category Beko

BEKO DRCS 68 W tumble dryer won't reset?

Drying light is on permanently whilst the start light continuously flashes. had repair man out as initiailly it was a belt problem - after refiting a new belt the above problem occured. he checked all the relays and now thinks it's probably a programmer problem - not sure if it's worth going any further if it is due to cost - does anyone know whether these lights indicate a particulary problem? - also the interior light isn't working but the bulb is fine so assume no power - thanks for any advice - simon.

simon rushton, August 2009

home Fix label Household Appliances label_important Tumble Dryers category Bekodone

Not getting power at all checked fuse etc no lights tried ten second and five!!! Any help??

Dave percival, July 2017

when i do that all it does is put the end/anticrease led on and does nothing, messing with it and it will come on do 1 revolution and stops again

Darren Robinson, May 2017

It's the microswitch that is triggered by the red clip on the condensing cassette (under the flap on the bottom of the machine) You just need to flick the clip a few times. To see if flicking it is doing anything .... Do it with the door open... It activates the internal light which will flicker until you manage to get it in the right place signified by the light staying on.

Le Alex Watson, March 2017

blink light pressing start button for 5secs worked for me

mike, February 2017

dryier keeps on cutting out after 20 min, so have to restart it. filters are clean water is empty. so know ideas what the problem is.

dan r, February 2016

drier stop starting, pressed start button in for count of ten and now it seems fine, it could be as someone suggested that I don't always allow it to finish its cycle (trying to reduce leccy bill) thought I was going to have expensive repair or replace costs. hope this helps others, many thanks to those who took time to post advice.
ps do not know what model I have other than it being a beko

helen, January 2016

i have a beko DRCS68W condenser drier, i had to fit a new front drum seal, and bearing pads, so before i started i took pictures on my phone of the wiring to the suppresor, can anyone throw any light on this, as you look down on the top there are 4 connections do the two browns go on the left and the 2 blues on the right thanks in advance for your help

Gordon G, August 2015

Lights keep flashin wont stay on

steph, May 2014

these are the biggest load of scrap i have ever worked on i have about 50 off these and they are the most unreliable dryer i have seen they make it to 12 months and brake most off the prob is no heat some is the heater element most are the pcb boards its time beko sorted it out

john thomson, March 2014

My Beko dryer comes on does 1-2 spins then goes back off! Any ideas to what's wrong with it please?

Debbie, November 2013

TY to reply 11, the 5 second reset worked for me also. :-)

PuddleSplasher, November 2013

The dryer is on heat is there but not drying clothes and no water is going to the drawer

nina, October 2013

having same problem folks, done the reset but still no hot air, just over 12 months old and although used alot, gutted that it may be something simple and the wife wants to but a new one, anybody else got an idea what it might be

fozzy foskett, May 2013

beko condensor 7kg dryer drum turning heat working but sounds like some thing is rubing noisey got to put your fingers in your ears very loud when runing sounds rough

john mays, March 2013

i have changed the belt on the drum and now i have no hot air

Wayne Bridges, February 2013

This took me over a hour of pushing buttons and trying to reset until i discovered !!!!! i had put the condenser back into its housing upside down ! put it the right way up and now everything is working fine !! i know, i`m a wally !!

owen, January 2013

what is supposed to happen in the reset process all mine does is beep constantly

joyce, November 2012

got this dryer it heats up ok but may sound silly but is drum supposed to turn?

adam, July 2012

I have the drcs68w beko tumble dryer, doesn't seem to be heating up, it's just cold air instead of hot air, I have tryed to reset, but holding in the cancel button, start button, turning it to delicates, everything, and still not heating up, only had it a year, and just ran out of warranty. Just my luck, is there any other way to try and reset, I've had all the panels of the back, cleaned it all , and still nothing,

Marlyn-Clair, May 2012

I have the same problem I switch it on the drying light is on and buzzer/cancel light and start and pause just flashing. Tried resetting nothing happens just beeps. Help?!

Naomi, April 2012

The reset saved me from buying a new dryer. Mine wasn't heating up.held the start button down for 5 seconds until the lights flashed and it's working perfectly!!

Maria, February 2012

Lovely Holding down for 5 seconds worked for me aswell.

Thanks

Keith Smith, September 2011

Hi I have a BEKO DRCS 68 W condenser dryer, It turns on, all lights display correctly, motor hums but drum does not turn. Belt is not broken, I bought a new one as I presumed that was the problem as I have had to replace in the past, but when I took the top off it was fine. Any ideas ?

Alex Percival, November 2010

Thanks ck - tried this already and no luck - also contacted beko service direct and call handler couldn't help much - have been told 60 quid cal out fee if ask beko engineeer over before any costs for parts - wonder if anyone knows whether can get control panels second hand and if so if easy to dit - thnaks again - simon

simon rushton, August 2009

switch power on with appliance on/off switch.Now press and hold the start button in for 5 seconds to reset it.hopefully it will work now

ck, August 2009

link Click here to see other fixes for Beko.