MY machine leaks while filling only. All outside plumbing is tight. The leak is variable, sometimes a few teaspoons and sometimes enough to run out from under the machine, sometimes no leak at all. Any ideas?

Nancy Bronson, February 2006

Hello,

The only way to tell is to open up the washer and turn the washer on. Use a flashlight if you have to, to find out where the water is coming from. Here are instructions to open up the cabinet.

The whole cabinet is removed in one piece. Start by removing the plastic endcaps (if you have them) on your console. Once these are removed, remove the screws to the console and pull the console towards the front slightly then flipping it back. Under the console you will see the lid switch connector, unplug it. Stick a flat screwdriver into the clips and push handle toward the rear of the washer to release the clips. Once those are out stand in front of the washer grab the middle and side of the cabinet and rock it toward you and place it out of the way.

JP, February 2006