i have a creda tumble dryer and it has no heat.
i have just changed the heating ellement but it still dont work.
the old ellemet just fell to bits when i changed it.
can any one help.

trevor, October 2004

CHEER TREVOR YOU SORTED MINE OUT WITH THAT

NEAL, October 2004

I have had the same problem on my Creda T622cw. Howver you have to fit both cutouts as a pair, that is how they are supplied. Ihave just paid £18 for the set.

Secondly I started tepairing mine some time ago and got distracted and now am not sure which wires go to the green spot cutout, if yours is same as mine could you let me knoww which wires go to which cutout.

Thanks

Russell, October 2004

i posted the add above .i have found out it was ,the thermostat onthe back and the one to the left. i just pulled the to wires off and connected then together and the heater started to heat up so i will relpace the first thermostat.

trevor, October 2004