GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

Mountfield Empress 16 sp - oil change?

Does anyone have a manual please, that explains the best way to do an oil change on a Mountfield Empress 16 sp lawnmower i.e is there an oil drain plug?

Thanks,
Carl Osborne, September 2009
Can anybody tell me where I can obtain a engine manual for a mountfield empress 16 with a TECUMSEH bvs143 Four stroke engine

Thanks

Trevor, March 2014
Yes - the drain plug is on the underside (obviously!) of the engine, - accessible via the cutting deck, just above the blades. You will need a 10mm square section bar to undo it.
Hope this helps.
Norman

Norman Wiseman, October 2009
Hi There, I have a Mountfield empress 16 that I bought second hand..... It has a briggs and Stratton Engine, If you have the same engine, take a look at BRIGGSandSTRATTON.com and you can print off an operators manual, which covers everything from servicing to repairs. Hope that helps.
Wendy

Wendy Ashton, September 2009
There is no service manual as such.

There are 2 ways to do an oil change ;-

1) Raise the mower so you can access the underside. DISCONNECT THE SPARK PLUG WIRE. Locate the drain plug - depending on the engine type, it will be a 3/8" socket head plug (a 3/8" drive socket extenson will fit), OR it will be a 3/8" MALE plug requiring a 3/8" open ended spanner to remove. It's quite obvious when you clean off all the crud on the bottom.

2) Remove the oil filler and physically tip the mower to empty it. Easier, but messier.

Refil with SAE30 oil.

phil_saunders(a)bigfoot.com

Phil Saunders, September 2009
link Click here to see other fixes for Mountfield.