I have not set the alarm in my new house and when I have looked at the panel (after my wife attempted to enter a few numbers) it now says Installer Mode! It does not appear to let you enter 4 numbers either (do not know the code but using the original settings to try and re enetr). Can someone advice how i set this and get it working???

STU, September 2009

Just moved in to house with this system

Installer mode is on and it keeps going off ??? Any help

Gg, February 2018

I entered 99 tick when prompted for installer mode. Now the system says 'Battery Missing'. I've installed new battery!!!

Dippy, January 2018

Hi

Mine shows X21: and I cant get out of installer mode

Any ideas please?

Suggy, October 2015

Many thanks guys! Came back from holiday two weeks ago and due to being tired i forgot about the alarm and by the time i had remembered my code it was to late. After encountering an ongoing problem with the alarm a few months ago, the egineer gave me the code to reset the alarm if it went off. Put the code in, but he forgot to tell me how you get out of installer mode. Did 99 like you suggested and it worked!

Many thanks for saving me money, by not having to call out an egineer.

Rob, October 2009

99 followed by tick will come out of installer mode

alarm engineer, September 2009

enter 99 then press the tick button.
keypad will say 'exit engineering' press tick again.
if keypad comes up with date and time the system is now ready to use.

fonzie, September 2009