Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Ian Scott asked ... Remove cover off gas boiler?    |    Click here to ask your question

how can i fix my veritas 8c alarm system?

we arrived home one night been in the house about 2 hours then the alarm went off nobody touch it or set it off it just went off on its own we went to switch it off then went off again when we had reset it the 24hr light stays on then flashes when the alarm has gone off this has resulted us to disconnect the alarm altogether and remove the battery can anybody help?
andy, September 2009
We have a veritas alarm and I need to disconnect it as it is going off all the time and waking family up. In the loft there is the box for the alarm is it safe to just disconnect the wiring or can that cause a problem?

Jontie G, January 2010
TAMPER oh no 24 hr basicly means tamper it can go off anytime when unset check all the sensors in corners of rooms open them and there should be a spring strech everyone on the pir's if that dosent do anything then go up to your bell box out side and check no loose wires and there should be a tamper switch or spring check them and do the same for pir's check loose wires if this does nothing check the main panel for anything stretch the spring if that dosent do anything either maybe battery replacement inside the house and maybe outside if theres a battery to the bell box if changing the battery dosent do anything then take the tamper away on the panel there will be a terminal called tamp take the tamper wires out of there and loop it with a piece of wire try them steps get back to me if that helps thanks death

death, September 2009
link Click here to see other fixes for Veritas.