hi i have a problem with the brakes on my clio and was wondering if any1 can help.....firstly i had problems with the peddle going striaght to the floor so i checked the fluid which was at correct level then the front calipers and pads plus brake lines and everything was in order so then checked the rear drums and noticed both wheel cylinders wer gone so replaced both cylinders and bled them and re'adjusted the shoes correctly, following this i took it for a test drive and it was ok for about 10 minits then peddle went straight to the floor again but after a few pumps its back 2 normal again then straight to the floor after a short while....would be greatfull if any1 could help ????? many thanks

tom hardy, September 2009

same thing is happening to me on my 1995 clio

saw brake fuild all over my RNS wheel so i replaced the cylinder and bleed the brakes drove it down the road and there was nothing there even though the pedal was rock soild when the engine was off. i'm guessing it's the master cylinder so will try and change it tomorrow

chris, November 2009

If the pedal is going to the floor with no resistance at all, and you're convinced that you've bled all of the air out, then fit a new master cylinder.

John, September 2009