How do you remove the front panel on a bosch maxx washing machine to replace the door seal ?

john, October 2009

Joe,

Thank you for detail and accurate instructions. I have one comment though:

>now two screws at the door switch
This was unnecessary for my maxx 4 (WFC 1667 OE). The front panel is removed with the door. And you only need to unplug the door lock wires from the back side of the front panel.

Nick, May 2010

first remove the outer retaining wire thats on the door seal.
next undo the screw at the bottom near the drain pump cover and remove that plastic panel.
next remove the soap draw.there is one screw at the bottom of the soap dispenser unit.now two screws at the door switch and next two screws at the bottom of the front panel.now remove the seal from the panel then remove the panel.now remove the spring on the seal to the shell.

baldyjoe, October 2009