home Fix label Household Appliances label_important Tumble Dryers category Whirlpool

broken start/stop switch on Whirlpool AWZ 2303?

Which pair of wires should I link to bypass the switch ?
(I can then switch on/off with mains socket switch)
I tried joining SST-3 to SD-2 and SST-2 to SD-1 as a first guess, but "door open" cut-off doesnt work.
I don't want to try another combination by more guess work !

Don Gill, October 2009

home Fix label Household Appliances label_important Tumble Dryers category Whirlpooldone

Mike, I take your point on the door switch being a safety device, however this WAS working fine. It's the push button start/stop switch that didn't work, so I tried bypassing it ....
The WAY I bypassed it (as described ) must have disabled the door switch !

Don Gill, October 2009

If the switch is broken buy & install a new one. The door switch is an important safety device & should not be tampered with. To obtain an electrical schematic to bench test a door switch you must supply the machine's service number. It starts with "85" & has 12 digits.

Mike, October 2009

link Click here to see other fixes for Whirlpool.

Fix Fault - Household Appliances

home label Household Appliances label_important Tumble Dryers

home Fix label Household Appliances label_important Tumble Dryers category Whirlpool

broken start/stop switch on Whirlpool AWZ 2303?

I can answer this question...

broken start/stop switch on Whirlpool AWZ 2303?

I can answer this question ...

broken start/stop switch on Whirlpool AWZ 2303?

White knight tumble dryer c44aw?

Boosh wta 3000 dryer?

Miele T260 is cutting out (with an alarm) and not heating up?

How do I fit belt on Hotpoint Aquarius?

Can I mend the snapped belt on tumble dryer?

Lealing zanussi TC7102W tumble dryer?

Broken hinge on Simpson Scirocco 555 dryer?

Miele WT2796?