home Fix label Bathroom Appliances label_important Baths and Showers

Redring Expressions 5005 Shower Fault?

Please help, we have not used our shower for a few months, went to use it last night and it cuts out after a few seconds........it will only run properly on cold function if you turn it to med or hot setting it cuts out totally but if you press the off button the cold comes out ok before switching off completely - basically it works fine on cold setting anything other than that the water spurts out fast then not at all

Karen Laking, October 2009

home Fix label Bathroom Appliances label_important Baths and Showersdone

our shower makes a banging noise when you switch it on

mr wallace, August 2017

Have to hold the on/off button in to get the water to warm up

Alan S63, May 2015

Just replaced the thermal cut out because shower wouldn't heat up. Now it won't come on on the high setting just medium and cold

paula, December 2014

temperature control not working. also water temperature occasionly goes very high

robert freeborn, August 2014

Hi am having a problem with water leaking out the top of the hose before it reaches the head. I've took it apart several times and can not work it out. Can anyone help?

Tom, February 2014

My redring expression 5005 started to leak in the black vent tube, please anybody could help me what is the problem of my shower.
replace the small rubber seel in the outlet ubend

kkoko, October 2013

Keeps coming on and of untill you switch the pull cord of

John bettley, September 2013

Hi water is coming out of the pipe at the bottom of my shower and out of the hose as well

margaret, March 2013

My redring expression 5005 started to leak in the black vent tube, please anybody could help me what is the problem of my shower.

Roland, August 2012

won't come on right away pulses

Andy Mackay, April 2012

Just had ours fixed today under the guarantee. Was pulsing on and off when switching off or not switching off at all other than at the main switch. Engineer reckons it was the on/off switch which had been affected by water getting in when the shower was on. There is a new cover which fits inside the unit and protects the button.
Obviously an after thought

Alan S, October 2011

I spoke to Redring Technical & they identified the problem as the Phased Shut down PCB. Part No for 8.5KW model is 93550835 - cost £27.60

Promptly delivered by Redring & easily fitted. Four terminals to pull off & re connect.

IsaacB, September 2011

my redring shower wont turn off,what can i do

r edwards, July 2011

I have the same problem, who makes Redring (thrown out all info). Does anyone have any contact numbers

Mel, September 2010

My Redring Expressions 5005 Pulses / pumps intermittenttly severly when switched on when using either the high or low settings, i thought it might be a preesure fault but the pressure appears to be fine. Does anybody have an idea what the cause may be???

Roy, August 2010

I purchased a new PCB (circuit board) direct from Redring as is the least expensive place to get it. Redring advised that this bit was causing the trouble, and my shower is working perfectly now, was easy to fit - it just clips in.
hope this helps!

a mcb, January 2010

I just phoned Redring and they are confident that the fault is the circuit board.
The part number for my shower is 93597813 and should only cost £20 to replace this part.
They say its easily installed. Will let you know if this fixes it.

a mcb, November 2009

I have the exact same problem - dont think I sent in the warranty card though. Hope this is an inexpensive problem to fix!

a mcb, November 2009

Hi, I'am having the same problem exactly with the Redring 500S. Will be checking it out later. Are you aware of the 36 month warranty for domestic use so long as you sent in the registration card.?

John D, October 2009